Re: lab 24 volume1 v11

Ah, interesting. I remember running into similar slot issues with 3725's on
an older version of dynamips too. Thanks for letting us know!

On Wed, Jul 22, 2009 at 9:08 AM, L. Jankok <ljankok_at_gmail.com> wrote:

> Bryan,
>
> It turned out to be a bug in dynamips. The connection was the standard
> connection between
> cat1 f1/4 and R4 f0/0 from the net file I have downloaded from the member
> site.
>
> The problem is that using the 3725 with two slots will break intervlan
> routing.
>
> I have removed the second slot and all was good. I had to adjust the net
> file
> for the interswitch connections and the connections to the Backbone
> routers.
> Nothing changed to the switch to routers connections.
>
> See attached my slightly modified net file which work just fine :)
>
> Cheers,
>
> LJ
>
> 2009/7/22 Bryan Bartik <bbartik_at_ipexpert.com>:
> > How are these connected? Can you give me a show cdp neighbors on these
> > devices?
> >
> > On Tue, Jul 21, 2009 at 3:03 PM, L. Jankok <ljankok_at_gmail.com> wrote:
> >>
> >> Dear list,
> >>
> >> I have in the weekends proctorlabs booked but during the week days I
> >> don't have 8 hours to spend so I
> >> use the dynamips file provided by ipexpert. My platform is macosx intel.
> >> Today I wanted to redo lab 24 I did last week on proctorlbabs since I
> >> had an issued with this lab.
> >>
> >> I have an annoying problem with dynamips and since this is my only
> >> option during the weeks it is
> >> pretty annoying.
> >>
> >> Basically the problem boils down to a layer 2 issue between cat1 and r4
> >>
> >> Cat3550-1#show ip arp
> >> Protocol Address Age (min) Hardware Addr Type Interface
> >> Internet 150.100.40.4 8 c200.0708.0000 ARPA Vlan40
> >> Internet 150.100.40.11 - c20d.070b.0000 ARPA Vlan40
> >> Cat3550-1#ping 150.100.40.4
> >>
> >> Type escape sequence to abort.
> >> Sending 5, 100-byte ICMP Echos to 150.100.40.4, timeout is 2 seconds:
> >> .....
> >> Success rate is 0 percent (0/5)
> >> Cat3550-1#
> >>
> >> 4#show ip arp
> >> Protocol Address Age (min) Hardware Addr Type Interface
> >> Internet 150.100.40.4 - c200.0708.0000 ARPA
> >> FastEthernet0/0
> >> Internet 150.100.40.11 0 Incomplete ARPA
> >> Internet 150.100.41.4 - c200.0708.0001 ARPA
> >> FastEthernet0/1
> >> R4#
> >>
> >> I have tried setting the speed and duplex, reloading both instances,
> >> deleting and making
> >> the vlan, shutting down the ports and up again, setting no switchport
> >> on f1/4.. nothing
> >> really helped for the problem still persists..
> >>
> >> Your help is appreciated.
> >>
> >> Cheers,
> >>
> >> LJ
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
> > --
> > Bryan Bartik
> > CCIE #23707 (R&S), CCNP
> > Sr. Support Engineer - IPexpert, Inc.
> > URL: http://www.IPexpert.com
> >
>

-- 
Bryan Bartik
CCIE #23707 (R&S), CCNP
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
Blogs and organic groups at http://www.ccie.net