lab 24 volume1 v11

Dear list,

I have in the weekends proctorlabs booked but during the week days I
don't have 8 hours to spend so I
use the dynamips file provided by ipexpert. My platform is macosx intel.
Today I wanted to redo lab 24 I did last week on proctorlbabs since I
had an issued with this lab.

I have an annoying problem with dynamips and since this is my only
option during the weeks it is
pretty annoying.

Basically the problem boils down to a layer 2 issue between cat1 and r4

Cat3550-1#show ip arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet 150.100.40.4 8 c200.0708.0000 ARPA Vlan40
Internet 150.100.40.11 - c20d.070b.0000 ARPA Vlan40
Cat3550-1#ping 150.100.40.4

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 150.100.40.4, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
Cat3550-1#

4#show ip arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet 150.100.40.4 - c200.0708.0000 ARPA FastEthernet0/0
Internet 150.100.40.11 0 Incomplete ARPA
Internet 150.100.41.4 - c200.0708.0001 ARPA FastEthernet0/1
R4#

I have tried setting the speed and duplex, reloading both instances,
deleting and making
the vlan, shutting down the ports and up again, setting no switchport
on f1/4.. nothing
really helped for the problem still persists..

Your help is appreciated.

Cheers,

LJ

Blogs and organic groups at http://www.ccie.net
Received on Tue Jul 21 2009 - 23:03:56 ART