All,
This ppp configuration was working before. Now, it has been failing. I debuged
the issue and could not find any wierd thing. I keeps on saying Authentication
failed. I have the username/password defined and as I said it has been working
before with no issues.
Any help as what I might be missing. I hope I am not missing something
obvious.
R2
++
!
username Rack1R2 password 0 CISCO
!
interface Serial0/1/0
ip address 136.1.23.2 255.255.255.0
encapsulation ppp
ppp authentication pap
ppp pap sent-username Rack1R2 password 0 CISCO
!
R3
++
!
username Rack1R3 password 0 CISCO
!
interface Serial1/3
ip address 136.1.23.3 255.255.255.0
encapsulation ppp
clock rate 64000
ppp authentication pap
ppp pap sent-username Rack1R3 password 0 CISCO
!
Rack1R2#ping 136.1.32.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 136.1.32.3, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
Rack1R3#debug ppp negotiation
*Jun 29 19:07:32.311: Se1/3 LCP: O CONFACK [ACKrcvd] id 223 len 14
*Jun 29 19:07:32.311: Se1/3 LCP: AuthProto PAP (0x0304C023)
*Jun 29 19:07:32.311: Se1/3 LCP: MagicNumber 0x26BD4B65 (0x050626BD4B65)
*Jun 29 19:07:32.311: Se1/3 LCP: State is Open
*Jun 29 19:07:32.311: Se1/3 PPP: Phase is AUTHENTICATING, by both
*Jun 29 19:07:32.311: Se1/3 PAP: Using hostname from interface PAP
*Jun 29 19:07:32.311: Se1/3 PAP: Using password from interface PAP
*Jun 29 19:07:32.311: Se1/3 PAP: O AUTH-REQ id 195 len 18 from "Rack1R3"
*Jun 29 19:07:32.319: Se1/3 PAP: I AUTH-REQ id 113 len 18 from "Rack1R2"
*Jun 29 19:07:32.319: Se1/3 PAP: Authenticating peer Rack1R2
*Jun 29 19:07:32.319: Se1/3 PPP: Phase is FORWARDING, Attempting Forward
*Jun 29 19:07:32.319: Se1/3 PPP: Phase is AUTHENTICATING, Unauthenticated
User
*Jun 29 19:07:32.319: Se1/3 PAP: O AUTH-NAK id 113 len 26 msg is
"Authentication failed"
-Yuri
Received on Mon Jun 29 2009 - 12:00:47 ART
This archive was generated by hypermail 2.2.0 : Wed Jul 01 2009 - 20:02:38 ART