RE: ppp connection not coming up

From: Joe Astorino <jastorino_at_ipexpert.com>
Date: Mon, 29 Jun 2009 15:12:10 -0400

Hey,

Your usernames are swapped. You need Rack1R3 as a username on R2 and visa
versa.

Regards,

Joe Astorino
CCIE #24347 (R&S)
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
 

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Cisco Fanatic
Sent: Monday, June 29, 2009 3:01 PM
To: ccielab_at_groupstudy.com
Subject: ppp connection not coming up

All,

This ppp configuration was working before. Now, it has been failing. I
debuged
the issue and could not find any wierd thing. I keeps on saying
Authentication
failed. I have the username/password defined and as I said it has been
working
before with no issues.

Any help as what I might be missing. I hope I am not missing something
obvious.

R2
++
!
username Rack1R2 password 0 CISCO
!
interface Serial0/1/0
 ip address 136.1.23.2 255.255.255.0
 encapsulation ppp
 ppp authentication pap
 ppp pap sent-username Rack1R2 password 0 CISCO
!

R3
++
!
username Rack1R3 password 0 CISCO
!
interface Serial1/3
 ip address 136.1.23.3 255.255.255.0
 encapsulation ppp
 clock rate 64000
 ppp authentication pap
 ppp pap sent-username Rack1R3 password 0 CISCO
!

Rack1R2#ping 136.1.32.3

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 136.1.32.3, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)

Rack1R3#debug ppp negotiation
*Jun 29 19:07:32.311: Se1/3 LCP: O CONFACK [ACKrcvd] id 223 len 14
*Jun 29 19:07:32.311: Se1/3 LCP: AuthProto PAP (0x0304C023)
*Jun 29 19:07:32.311: Se1/3 LCP: MagicNumber 0x26BD4B65 (0x050626BD4B65)
*Jun 29 19:07:32.311: Se1/3 LCP: State is Open
*Jun 29 19:07:32.311: Se1/3 PPP: Phase is AUTHENTICATING, by both
*Jun 29 19:07:32.311: Se1/3 PAP: Using hostname from interface PAP
*Jun 29 19:07:32.311: Se1/3 PAP: Using password from interface PAP
*Jun 29 19:07:32.311: Se1/3 PAP: O AUTH-REQ id 195 len 18 from "Rack1R3"
*Jun 29 19:07:32.319: Se1/3 PAP: I AUTH-REQ id 113 len 18 from "Rack1R2"
*Jun 29 19:07:32.319: Se1/3 PAP: Authenticating peer Rack1R2
*Jun 29 19:07:32.319: Se1/3 PPP: Phase is FORWARDING, Attempting Forward
*Jun 29 19:07:32.319: Se1/3 PPP: Phase is AUTHENTICATING, Unauthenticated
User
*Jun 29 19:07:32.319: Se1/3 PAP: O AUTH-NAK id 113 len 26 msg is
"Authentication failed"

-Yuri
Received on Mon Jun 29 2009 - 15:12:10 ART

This archive was generated by hypermail 2.2.0 : Wed Jul 01 2009 - 20:02:38 ART