On R2, you are sending username Rack1R2 password CISCO to R3 for
authentication, now R3 needs to verify it using its local Database.
So, R3 should have "username Rack1R2 password CISCO" in its local Database.
In your case this command is configured on R2 instead of R3.
I
On Mon, Jun 29, 2009 at 3:12 PM, Joe Astorino <jastorino_at_ipexpert.com>wrote:
> Hey,
>
> Your usernames are swapped. You need Rack1R3 as a username on R2 and visa
> versa.
>
> Regards,
>
> Joe Astorino
> CCIE #24347 (R&S)
> Sr. Support Engineer - IPexpert, Inc.
> URL: http://www.IPexpert.com <http://www.ipexpert.com/>
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Cisco Fanatic
> Sent: Monday, June 29, 2009 3:01 PM
> To: ccielab_at_groupstudy.com
> Subject: ppp connection not coming up
>
> All,
>
> This ppp configuration was working before. Now, it has been failing. I
> debuged
> the issue and could not find any wierd thing. I keeps on saying
> Authentication
> failed. I have the username/password defined and as I said it has been
> working
> before with no issues.
>
> Any help as what I might be missing. I hope I am not missing something
> obvious.
>
> R2
> ++
> !
> username Rack1R2 password 0 CISCO
> !
> interface Serial0/1/0
> ip address 136.1.23.2 255.255.255.0
> encapsulation ppp
> ppp authentication pap
> ppp pap sent-username Rack1R2 password 0 CISCO
> !
>
> R3
> ++
> !
> username Rack1R3 password 0 CISCO
> !
> interface Serial1/3
> ip address 136.1.23.3 255.255.255.0
> encapsulation ppp
> clock rate 64000
> ppp authentication pap
> ppp pap sent-username Rack1R3 password 0 CISCO
> !
>
> Rack1R2#ping 136.1.32.3
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 136.1.32.3, timeout is 2 seconds:
> .....
> Success rate is 0 percent (0/5)
>
> Rack1R3#debug ppp negotiation
> *Jun 29 19:07:32.311: Se1/3 LCP: O CONFACK [ACKrcvd] id 223 len 14
> *Jun 29 19:07:32.311: Se1/3 LCP: AuthProto PAP (0x0304C023)
> *Jun 29 19:07:32.311: Se1/3 LCP: MagicNumber 0x26BD4B65 (0x050626BD4B65)
> *Jun 29 19:07:32.311: Se1/3 LCP: State is Open
> *Jun 29 19:07:32.311: Se1/3 PPP: Phase is AUTHENTICATING, by both
> *Jun 29 19:07:32.311: Se1/3 PAP: Using hostname from interface PAP
> *Jun 29 19:07:32.311: Se1/3 PAP: Using password from interface PAP
> *Jun 29 19:07:32.311: Se1/3 PAP: O AUTH-REQ id 195 len 18 from "Rack1R3"
> *Jun 29 19:07:32.319: Se1/3 PAP: I AUTH-REQ id 113 len 18 from "Rack1R2"
> *Jun 29 19:07:32.319: Se1/3 PAP: Authenticating peer Rack1R2
> *Jun 29 19:07:32.319: Se1/3 PPP: Phase is FORWARDING, Attempting Forward
> *Jun 29 19:07:32.319: Se1/3 PPP: Phase is AUTHENTICATING, Unauthenticated
> User
> *Jun 29 19:07:32.319: Se1/3 PAP: O AUTH-NAK id 113 len 26 msg is
> "Authentication failed"
>
> -Yuri
>
> _________________________________________________________________
> Hotmail. has ever-growing storage! Don t worry about storage limits.
>
> http://windowslive.com/Tutorial/Hotmail/Storage?ocid=TXT_TAGLM_WL_HM_Tutoria
> l
> _Storage_062009
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.12.93/2206 - Release Date: 06/29/09
> 05:54:00
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Mon Jun 29 2009 - 15:29:20 ART
This archive was generated by hypermail 2.2.0 : Wed Jul 01 2009 - 20:02:38 ART