Re: ppp connection not coming up

Your usernames are backwards. user Rack1R2 needs to be on router 3. User
rack1R3 needs to be on router 2.

Charles

                                                                                                                                 
  From: Cisco Fanatic <ebay_products_at_hotmail.com>
                                                                                                                                 
  To: <ccielab_at_groupstudy.com>
                                                                                                                                 
  Date: 06/29/2009 02:02 PM
                                                                                                                                 
  Subject: ppp connection not coming up
                                                                                                                                 

All,

This ppp configuration was working before. Now, it has been failing. I
debuged
the issue and could not find any wierd thing. I keeps on saying
Authentication
failed. I have the username/password defined and as I said it has been
working
before with no issues.

Any help as what I might be missing. I hope I am not missing something
obvious.

R2
++
!
username Rack1R2 password 0 CISCO
!
interface Serial0/1/0
 ip address 136.1.23.2 255.255.255.0
 encapsulation ppp
 ppp authentication pap
 ppp pap sent-username Rack1R2 password 0 CISCO
!

R3
++
!
username Rack1R3 password 0 CISCO
!
interface Serial1/3
 ip address 136.1.23.3 255.255.255.0
 encapsulation ppp
 clock rate 64000
 ppp authentication pap
 ppp pap sent-username Rack1R3 password 0 CISCO
!

Rack1R2#ping 136.1.32.3

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 136.1.32.3, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)

Rack1R3#debug ppp negotiation
*Jun 29 19:07:32.311: Se1/3 LCP: O CONFACK [ACKrcvd] id 223 len 14
*Jun 29 19:07:32.311: Se1/3 LCP: AuthProto PAP (0x0304C023)
*Jun 29 19:07:32.311: Se1/3 LCP: MagicNumber 0x26BD4B65 (0x050626BD4B65)
*Jun 29 19:07:32.311: Se1/3 LCP: State is Open
*Jun 29 19:07:32.311: Se1/3 PPP: Phase is AUTHENTICATING, by both
*Jun 29 19:07:32.311: Se1/3 PAP: Using hostname from interface PAP
*Jun 29 19:07:32.311: Se1/3 PAP: Using password from interface PAP
*Jun 29 19:07:32.311: Se1/3 PAP: O AUTH-REQ id 195 len 18 from "Rack1R3"
*Jun 29 19:07:32.319: Se1/3 PAP: I AUTH-REQ id 113 len 18 from "Rack1R2"
*Jun 29 19:07:32.319: Se1/3 PAP: Authenticating peer Rack1R2
*Jun 29 19:07:32.319: Se1/3 PPP: Phase is FORWARDING, Attempting Forward
*Jun 29 19:07:32.319: Se1/3 PPP: Phase is AUTHENTICATING, Unauthenticated
User
*Jun 29 19:07:32.319: Se1/3 PAP: O AUTH-NAK id 113 len 26 msg is
"Authentication failed"

-Yuri
Received on Mon Jun 29 2009 - 14:10:20 ART