Re: EIGRP Time Limit for Active State

Good question. I know you can see the timer in action with "show ip eigrp
topology" when there is a route active. I guess the command would be:

show run | inc active-time

:-)

Bryan Bartik
CCIE #23707 (R&S), CCNP
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com

On Sun, May 10, 2009 at 7:59 PM, ALL From_NJ <all.from.nj_at_gmail.com> wrote:

> Happy Mother's day to all the CCIE moms out there. ;-)
>
> To configure the SIA timers:
>
> http://www.cisco.com/en/US/docs/ios/iproute/command/reference/irp_eig2.html#wp1014389
>
> To view the SIA timers: ? I could not find anything.
>
> The default timer is default roughly 3 minutes for a router to wait for a
> query. During this wait time, it is active. This tech tip has more:
>
>
> http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008010f016.shtml
>
> Sorry I could not find all the info you need, go to go now ... with it
> being
> mother's day I have to do EVERYTHING around the house for this one day.
> ;-)
>
>
> HTH,
>
> Andrew Lee Lissitz
>
>
>
> On Sun, May 10, 2009 at 9:17 PM, walkingwithcisco <
> walkingwithcisco_at_gmail.com> wrote:
>
> > Dear Experts,
> >
> > What is the default EIGRP Time Limit for Active State?
> > Which command can show that ?
> > Thanks.
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Andrew Lee Lissitz
> all.from.nj_at_gmail.com
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

--
Blogs and organic groups at http://www.ccie.net