Re: Quick question about ODR

Thanks Scott. Is it still in a classful format only or can wildcards be added?

Sent from handheld.

On May 11, 2009, at 10:39 AM, "Scott Morris" <smorris_at_internetworkexpert.com<mailto:smorris_at_internetworkexpert.com>> wrote:

I've both used one and and not used one, but never had any problem with functionality....

You use the network statement to DIRECT which interfaces you are sending the 0/0 to. Otherwise with just "router odr" you'll blast that out to all your CDP interfaces/neighbors which may not be what you want.

HTH,

Scott Morris, CCIEx4 (R&S/ISP-Dial/Security/Service Provider) #4713,

JNCIE-M #153, JNCIS-ER, CISSP, et al.

JNCI-M, JNCI-ER

<mailto:smorris_at_internetworkexpert.com>smorris_at_internetworkexpert.com<mailto:smorris_at_internetworkexpert.com>

Internetwork Expert, Inc.

<http://www.InternetworkExpert.com>http://www.InternetworkExpert.com

Toll Free: 877-224-8987

Outside US: 775-826-4344

Knowledge is power.

Power corrupts.

Study hard and be Eeeeviiiil......

Ryan West wrote:

Hello,

I had my last short session on the ASET labs last night for some final
warm-ups. And I ran into an issue with ODR. It seems the correct answer was
to include a network statement on the hub router. The configuration guide
would leave you to believe that feature doesn't even exist. As far as syntax
and timers go, it's very RIP like, so I can understand the desire to want to
include a network statement. However, the spoke router was getting its
default route via o... Any idea why a network statement would be used?

Thanks

-ryan

Blogs and organic groups at <http://www.ccie.net> http://www.ccie.net
Received on Mon May 11 2009 - 11:28:45 ART