From: Aundra Browning (aundra.browning@earthlink.net)
Date: Wed Dec 17 2008 - 17:24:19 ARST
You are entering your value in BITS, the policer in this case wants BYTES so
divide 32000/8 = 4000 for Bc......
Be careful with your values when configuring QoS policy - look at the output
of ?
IOS doesn't always take consistent values when configuring various forms of
QoS....
Aundra
CCIE #21901 (R&S), CCDP
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Amr
Sent: Wednesday, December 17, 2008 1:31 PM
To: ccielab
Subject: IEWB-VOL2 LAB1 task 7.2
Dear All,
The question says that to allow burst of 1/4 th of this rate
(128Kbps) when configuring frame relay traffic shaping on the serial
interface
So should the Bc here is equal to 128000/4 = 32000 not 4000 as in the
solution guide
So the configuration must be as below
R1#sh policy-map ICMP
Policy Map ICMP
Class ICMP
police cir 128000 bc 32000
conform-action transmit
exceed-action drop
Please Advice
Thanks In Advance
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:09 ARST