Re: I am getting a K-value mismatch & retry limit exceeded

From: Narbik Kocharians (narbikk@gmail.com)
Date: Sun Nov 02 2008 - 17:24:24 ARST

Make sure that the interfaces are in the correct VLANs, do not put all
interfaces of all routers in the same VLAN. If you are doing it in
Frame-relay, you should ensure that there are no other frame mapping that
ones desired.

On Sun, Nov 2, 2008 at 11:10 AM, Piotr <usaccie@gmail.com> wrote:

> Switch:
>
> 05:04:04: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
> 183.1.105.5(FastEthernet0/18) is up: new adjacency
> --More--
> 05:05:23: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
> 183.1.105.5(FastEthernet0/18) is down: K-value mismatch
> --More--
> 05:05:26: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
> 183.1.105.5(FastEthernet0/18) is up: new adjacency
>
> router eigrp 100
> network 183.1.105.10 0.0.0.0
> network 183.1.107.10 0.0.0.0
> no auto-summary
> eigrp router-id 150.1.10.10
>
> interface FastEthernet0/18
> no switchport
> ip address 183.1.105.10 255.255.255.0
>
>
> Routing Protocol is "eigrp 100"
> Outgoing update filter list for all interfaces is not set
> Incoming update filter list for all interfaces is not set
> Default networks flagged in outgoing updates
> Default networks accepted from incoming updates
> EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
> EIGRP maximum hopcount 100
> EIGRP maximum metric variance 1
> Redistributing: eigrp 100
> EIGRP NSF-aware route hold timer is 240s
> Automatic network summarization is not in effect
> Maximum path: 4
> Routing for Networks:
> 183.1.105.10/32
> 183.1.107.10/32
> Routing Information Sources:
> Gateway Distance Last Update
> 183.1.107.7 90 00:07:43
> Distance: internal 90 external 170
>
>
>
>
> router:
> *Nov 2 13:55:54.926: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
> 183.1.105.10 (FastEthernet0/0) is down: retry limit exceeded
> RSRack1R5(config-router)#
> *Nov 2 13:55:57.322: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
> 183.1.105.10 (FastEthernet0/0) is up: new adjacency
> RSRack1R5(config-router)#
> *Nov 2 13:57:16.834: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
> 183.1.105.10 (FastEthernet0/0) is down: retry limit exceeded
> RSRack1R5(config-router)#
> *Nov 2 13:57:20.290: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
> 183.1.105.10 (FastEthernet0/0) is up: new adjacency
>
>
> router eigrp 100
> network 183.1.105.5 0.0.0.0
> no auto-summary
> eigrp router-id 150.1.5.5
>
>
> interface FastEthernet0/0
> ip address 183.1.105.5 255.255.255.0
> duplex auto
> speed auto
>
>
> Routing Protocol is "eigrp 100"
> Outgoing update filter list for all interfaces is not set
> Incoming update filter list for all interfaces is not set
> Default networks flagged in outgoing updates
> Default networks accepted from incoming updates
> EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
> EIGRP maximum hopcount 100
> EIGRP maximum metric variance 1
> Redistributing: eigrp 100
> EIGRP NSF-aware route hold timer is 240s
> Automatic network summarization is not in effect
> Maximum path: 4
> Routing for Networks:
> 183.1.105.5/32
> Routing Information Sources:
> Gateway Distance Last Update
> 183.1.105.10 90 00:09:49
> Distance: internal 90 external 170
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

-- 
Narbik Kocharians
CCSI#30832, CCIE# 12410 (R&S, SP, Security)
www.MicronicsTraining
www.Net-Workbooks.com
Sr. Technical Instructor

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:28 ARST