Re: I am getting a K-value mismatch & retry limit exceeded

From: Piotr (usaccie@gmail.com)
Date: Sun Nov 02 2008 - 21:16:23 ARST


The interfaces appear to be in the correct vlans as per the solution.

On Sun, Nov 2, 2008 at 2:24 PM, Narbik Kocharians <narbikk@gmail.com> wrote:

> Make sure that the interfaces are in the correct VLANs, do not put all
> interfaces of all routers in the same VLAN. If you are doing it in
> Frame-relay, you should ensure that there are no other frame mapping that
> ones desired.
>
> On Sun, Nov 2, 2008 at 11:10 AM, Piotr <usaccie@gmail.com> wrote:
>
>> Switch:
>>
>> 05:04:04: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
>> 183.1.105.5(FastEthernet0/18) is up: new adjacency
>> --More--
>> 05:05:23: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
>> 183.1.105.5(FastEthernet0/18) is down: K-value mismatch
>> --More--
>> 05:05:26: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
>> 183.1.105.5(FastEthernet0/18) is up: new adjacency
>>
>> router eigrp 100
>> network 183.1.105.10 0.0.0.0
>> network 183.1.107.10 0.0.0.0
>> no auto-summary
>> eigrp router-id 150.1.10.10
>>
>> interface FastEthernet0/18
>> no switchport
>> ip address 183.1.105.10 255.255.255.0
>>
>>
>> Routing Protocol is "eigrp 100"
>> Outgoing update filter list for all interfaces is not set
>> Incoming update filter list for all interfaces is not set
>> Default networks flagged in outgoing updates
>> Default networks accepted from incoming updates
>> EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
>> EIGRP maximum hopcount 100
>> EIGRP maximum metric variance 1
>> Redistributing: eigrp 100
>> EIGRP NSF-aware route hold timer is 240s
>> Automatic network summarization is not in effect
>> Maximum path: 4
>> Routing for Networks:
>> 183.1.105.10/32
>> 183.1.107.10/32
>> Routing Information Sources:
>> Gateway Distance Last Update
>> 183.1.107.7 90 00:07:43
>> Distance: internal 90 external 170
>>
>>
>>
>>
>> router:
>> *Nov 2 13:55:54.926: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
>> 183.1.105.10 (FastEthernet0/0) is down: retry limit exceeded
>> RSRack1R5(config-router)#
>> *Nov 2 13:55:57.322: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
>> 183.1.105.10 (FastEthernet0/0) is up: new adjacency
>> RSRack1R5(config-router)#
>> *Nov 2 13:57:16.834: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
>> 183.1.105.10 (FastEthernet0/0) is down: retry limit exceeded
>> RSRack1R5(config-router)#
>> *Nov 2 13:57:20.290: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
>> 183.1.105.10 (FastEthernet0/0) is up: new adjacency
>>
>>
>> router eigrp 100
>> network 183.1.105.5 0.0.0.0
>> no auto-summary
>> eigrp router-id 150.1.5.5
>>
>>
>> interface FastEthernet0/0
>> ip address 183.1.105.5 255.255.255.0
>> duplex auto
>> speed auto
>>
>>
>> Routing Protocol is "eigrp 100"
>> Outgoing update filter list for all interfaces is not set
>> Incoming update filter list for all interfaces is not set
>> Default networks flagged in outgoing updates
>> Default networks accepted from incoming updates
>> EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
>> EIGRP maximum hopcount 100
>> EIGRP maximum metric variance 1
>> Redistributing: eigrp 100
>> EIGRP NSF-aware route hold timer is 240s
>> Automatic network summarization is not in effect
>> Maximum path: 4
>> Routing for Networks:
>> 183.1.105.5/32
>> Routing Information Sources:
>> Gateway Distance Last Update
>> 183.1.105.10 90 00:09:49
>> Distance: internal 90 external 170
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> Narbik Kocharians
> CCSI#30832, CCIE# 12410 (R&S, SP, Security)
> www.MicronicsTraining
> www.Net-Workbooks.com
> Sr. Technical Instructor

Blogs and organic groups at http://www.ccie.net



This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:28 ARST