From: Ajay mehra (ajaymehra01@gmail.com)
Date: Fri Jul 25 2008 - 01:49:17 ART
Hi Freinds,
This one is taken from IE practise labs
I have following 2 commands on Cisco ASA
http server enable
http 10.0.0.100 255.255.255.255 dmz
verification part says"
use your browser to connect to the ASA firewall. Enter enable password on
authentication, if it's set"
When I try connecting to ASA with https://10.0.0.100/admin/index.html, I am
asked to authenticate irrespective of whether enable password is configured
or not.
Please help me to clear some basic doubts.
1: What username should I use to authenticate if I have not configured any
username?
2: If i configure username password using "username" command then it gets
authenticated but says "page can not be displayed". is there anything in
configuration that I am missing on ASA to get cisco ASDM page?
3: On the similar line when i use SSH to connect to ASA is the default
username is "pix" ?
Thanks,
Ajay
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:57 ART