From: Jian Gu (guxiaojian@gmail.com)
Date: Fri Jul 25 2008 - 01:56:57 ART
I am confused, when you configure "http 10.0.0.100 255.255.255.255 dmz",
that allows http client connection from host 10.0.0.100, then how do you
expect anything coming up by https to 10.0.0.100?
On Thu, Jul 24, 2008 at 9:49 PM, Ajay mehra <ajaymehra01@gmail.com> wrote:
> Hi Freinds,
>
> This one is taken from IE practise labs
>
> I have following 2 commands on Cisco ASA
>
> http server enable
> http 10.0.0.100 255.255.255.255 dmz
>
> verification part says"
> use your browser to connect to the ASA firewall. Enter enable password on
> authentication, if it's set"
>
>
> When I try connecting to ASA with https://10.0.0.100/admin/index.html, I
> am
> asked to authenticate irrespective of whether enable password is configured
> or not.
>
> Please help me to clear some basic doubts.
>
> 1: What username should I use to authenticate if I have not configured any
> username?
>
> 2: If i configure username password using "username" command then it gets
> authenticated but says "page can not be displayed". is there anything in
> configuration that I am missing on ASA to get cisco ASDM page?
>
> 3: On the similar line when i use SSH to connect to ASA is the default
> username is "pix" ?
>
> Thanks,
> Ajay
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:57 ART