From: Ajay mehra (ajaymehra01@gmail.com)
Date: Fri Jul 25 2008 - 03:01:55 ART
There is no https command in ASA, not sure why Cisco don't have it..http
server enable command is used to enable ASA to listen on 443 by default.
ciscoasa(config)# http server enable ?
configure mode commands/options:
<1-65535> The management server's SSL listening port. TCP port 443 is the
default.
<cr>
On 25/07/2008, Jian Gu <guxiaojian@gmail.com> wrote:
>
> I am confused, when you configure "http 10.0.0.100 255.255.255.255 dmz",
> that allows http client connection from host 10.0.0.100, then how do you
> expect anything coming up by https to 10.0.0.100?
>
> On Thu, Jul 24, 2008 at 9:49 PM, Ajay mehra <ajaymehra01@gmail.com>
> wrote:
>
>> Hi Freinds,
>>
>> This one is taken from IE practise labs
>>
>> I have following 2 commands on Cisco ASA
>>
>> http server enable
>> http 10.0.0.100 255.255.255.255 dmz
>>
>> verification part says"
>> use your browser to connect to the ASA firewall. Enter enable password on
>> authentication, if it's set"
>>
>>
>> When I try connecting to ASA with https://10.0.0.100/admin/index.html, I
>> am
>> asked to authenticate irrespective of whether enable password is
>> configured
>> or not.
>>
>> Please help me to clear some basic doubts.
>>
>> 1: What username should I use to authenticate if I have not configured any
>> username?
>>
>> 2: If i configure username password using "username" command then it gets
>> authenticated but says "page can not be displayed". is there anything in
>> configuration that I am missing on ASA to get cisco ASDM page?
>>
>> 3: On the similar line when i use SSH to connect to ASA is the default
>> username is "pix" ?
>>
>> Thanks,
>> Ajay
>>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:57 ART