From: Vikram Dahiya (vikramdahiya@gmail.com)
Date: Thu May 01 2008 - 15:45:18 ART
Thanks Avner, for responding so quickly..
Here are my observation i want to share..
Gateway in RS1 zone is registering with its E.164 numbers to the
Gatekeeper.. thats why didnt configure the prefix for the same. So I suppose
Gatepeeker should be knowing that calls are going to gateway in RS1 zone.
Please correct me if I am wrong.
Also,
when i do " show gatekeeper zone status " I am seeing only the current total
banwidth field is getting updated not the current interzone bandwidth field
when call is being made.
Probably that may be the reason why bandwidth interzone command is not
restricting the over usage of BW. However with bandwidth total command CAC
for excess BW utilisation is working.
Could not understadn why the current interzone field is not getting
populated.
Appreciate your help in understanding the cause for this ...
Regards,
Vikram Singh Dahiya
On 5/1/08, Avner Izhar <aizhar@ccbootcamp.com> wrote:
>
>
> The gatekeeper probably don't know what zone the call is associated with,
> since there is no 'zone prefix' configured.
>
> He is probably 'thinking' that the call is internal to zone HQ-RTR and
> that call scenario is not subjected to CAC.
>
> When you have an active call, type 'show gatekeeper zone status' and it
> will tell you what bandwidth is available/used and where.
>
> HTH,
> -------------------------------------------
> thanks,
> Avner Izhar
> CCIE#15999 (Voice), CCVP, CCSI# 31623
> Technical Training Manager
> CCBOOTCAMP - A Cisco Sponsored Organization (SO)
> Email: aizhar@ccbootcamp.com
> Toll Free: 877-654-2243
> Direct: +1-702-968-5100 = Outside the USA
> FAX: +1-702-446-8012
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Vikram Dahiya
> Sent: Thursday, May 01, 2008 7:17 AM
> To: Cisco certification
> Subject: Gatekeeper Call Admission Control issue
>
> I was trying to configure the gatekeeper to limit the bandwidth between
> interzone sessions for say 128 kbps... both zones where i wanted to limit
> this are local.
>
> I found the gatekeeper was letting more then one G711 calls between these
> zones... below listed is the config on my Gatekeeper..
>
> gatekeeper
> zone local HQ-RTR voice.com 192.168.10.1 zone local RS1 voice.com gw-type-prefix
> 1#* default-technology bandwidth interzone zone RS1 128 no shutdown
>
> It will be great if someone can suggest what I am missing here.
>
> Thanks..
>
> Regards,
> Vikram Singh Dahiya
>
>
> Pass the CCIE in six weeks, Guaranteed!
> http://www.certscience.com/CCIE
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 269.23.6/1407 - Release Date: 4/30/2008
> 11:35 AM
>
>
> No virus found in this outgoing message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 269.23.6/1407 - Release Date: 4/30/2008
> 11:35 AM
Pass the CCIE in six weeks, Guaranteed!
http://www.certscience.com/CCIE
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:15 ART