From: Avner Izhar (aizhar@ccbootcamp.com)
Date: Thu May 01 2008 - 15:06:30 ART
The gatekeeper probably dont know what zone the call is associated with, since there is no 'zone prefix' configured.
He is probably 'thinking' that the call is internal to zone HQ-RTR and that call scenario is not subjected to CAC.
When you have an active call, type 'show gatekeeper zone status' and it will tell you what bandwidth is available/used and where.
HTH,
-------------------------------------------
thanks,
Avner Izhar
CCIE#15999 (Voice), CCVP, CCSI# 31623
Technical Training Manager
CCBOOTCAMP - A Cisco Sponsored Organization (SO)
Email: aizhar@ccbootcamp.com
Toll Free: 877-654-2243
Direct: +1-702-968-5100 = Outside the USA
FAX: +1-702-446-8012
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Vikram Dahiya
Sent: Thursday, May 01, 2008 7:17 AM
To: Cisco certification
Subject: Gatekeeper Call Admission Control issue
I was trying to configure the gatekeeper to limit the bandwidth between interzone sessions for say 128 kbps... both zones where i wanted to limit this are local.
I found the gatekeeper was letting more then one G711 calls between these zones... below listed is the config on my Gatekeeper..
gatekeeper
zone local HQ-RTR voice.com 192.168.10.1 zone local RS1 voice.com gw-type-prefix 1#* default-technology bandwidth interzone zone RS1 128 no shutdown
It will be great if someone can suggest what I am missing here.
Thanks..
Regards,
Vikram Singh Dahiya
Pass the CCIE in six weeks, Guaranteed!
http://www.certscience.com/CCIE
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:15 ART