From: Jens Petter Johansen (jenseike@start.no)
Date: Sat Apr 26 2008 - 14:16:15 ART
Hi group..
I am testing sending a default route trough ospf, but are not able to do
it.. I really donbt understand why I am not???..
I have tried both using redistribute static as show`n below and only
using the default-information originate always by
It selfe, but nothing is working.. I see that the default are in the
database and the routing table but id does not
leave the router.. I have not any filter of any kind going on..
Anybody that have any idea what is happening??
interface GigabitEthernet0/1.153
encapsulation dot1Q 153
ip address 172.17.255.1 255.255.255.248
router ospf 12
log-adjacency-changes
redistribute static subnets route-map static_default
network 172.17.255.1 0.0.0.0 area 0
default-information originate allways
ip route 0.0.0.0 0.0.0.0 193.215.248.1
Link ID ADV Router Age Seq# Checksum Link
count
172.25.204.226 172.25.204.226 992 0x80000099 0x003CEC 1
193.215.248.15 193.215.248.15 987 0x8000002F 0x004FEF 1
&nbs p; Net Link States (Area 0)
Link ID ADV Router Age Seq# Checksum
172.17.255.4 172.25.204.226 993 0x8000003C 0x00F9BD
&nbs p; Type-5 AS External Link States
Link ID ADV Router Age Seq# Checksum Tag
0.0.0.0 193.215.248.15 993 0x8000002E 0x00EFE8 12
148.122.166.184 172.25.204.226 653 0x80000087 0x00875A 103562207
148.122.166.188 172.25.204.226 653 0x80000087 0x005F7E 103562207
148.122.188.12 172.25.204.226 653 0x80000087 0x005325 103562207
148.122.188.232 172.25.204.226 653 0x80000087 0x00B2E8 103562207
172.17.248.0 172.25.204.226 411 0x80000036 0x002601 103562207
wlan-glue#sh ip os ne
Neighbor ID Pri State Dead Time Address
Interface
172.25.204.226 1 FULL/DR 00:00:37 172.17.255.4
GigabitEthernet0/1.153
-------------------------------------------------------------------------
FC% din egen, gratis e-postadresse pC% Start.no
Pass the CCIE in six weeks, Guaranteed!
http://www.certscience.com/CCIE
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:52 ART