From: Mike Haddad (mike.haddad@hotmail.com)
Date: Sun Mar 30 2008 - 03:54:30 ART
Hello,
I still don't understand why the below ACL can't be grouped:
interface Loopback0
ip pim sparse-dense-mode
!
ip pim send-rp-announce Loopback0 scope 16 group-list 50
!
access-list 50 permit 226.0.0.0 1.255.255.255
access-list 50 permit 228.0.0.0 3.255.255.255
access-list 50 permit 232.0.0.0 3.255.255.255
access-list 50 permit 236.0.0.0 1.255.255.255
access-list 50 permit 238.0.0.0 0.255.255.255
Why can't we group them as:
access-list 50 permit 226.0.0.0 12.255.255.255
Thanks for the clarification,
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:54 ART