From: Mick Vaites (mick@pobox.net.uk)
Date: Fri Feb 15 2008 - 11:59:32 ARST
Hi All,
I am guessing this must have been asked before ... but I cannot locate
it ... apologies in advance for asking again.
I have been struggling to get inverse arp on a specific DLCI to come up
unless I specify it using "frame-relay interface-dlci [dlci] in the
config .. eg:
R1 (connected to Frame switch with DLCI 102 103 104 105)
interface Serial0/0
encapsulation frame-relay
ip add 12.12.12.1 255.255.255.0
no frame-relay inverse-arp ip 103
no frame-relay inverse-arp ip 104
no frame-relay inverse-arp ip 105
R2 (connected to Frame switch with DLCI 201 203 204 205)
interface Serial0/0
encapsulation frame-relay
ip addresss 12.12.12.2 255.255.255.0
no frame-relay inverse-arp ip 203
no frame-relay inverse-arp ip 204
no frame-relay inverse-arp ip 205
This senario produces no maps no matter how long I wait ...
However adding :
R1
Serial0/0
frame-relay interface-dlci 102
R2
Serial0/0
frame-relay interface-dlci 201
and it springs into life.
I believe the additional config is unnecessary but for the life of me I
am baffled as to why.I need it.
Routers/IOS are 3640/12.4.8d and 2811/12.4.10c
Thanks in advance
Mick
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:48 ARST