Re: Frame-relay inverse-arp ...

From: John (jgarrison1@austin.rr.com)
Date: Mon Feb 18 2008 - 11:54:00 ARST


Mick,

I have a question for you. If you disable inverse arp how will the Frame
process know which dlci's are mapped to an ip address?
----- Original Message -----
From: "Tony Schaffran (GS)" <groupstudy@cconlinelabs.com>
To: "'Mick Vaites'" <mick@pobox.net.uk>; <ccielab@groupstudy.com>
Sent: Saturday, February 16, 2008 9:19 PM
Subject: RE: Frame-relay inverse-arp ...

> Have you tried to reboot the routers?
>
>
> Tony Schaffran
> Network Analyst
> CCIE #11071
> CCNP, CCNA, CCDA,
> NNCDS, NNCSS, CNE, MCSE
>
> www.cconlinelabs.com
> Your #1 choice for online Cisco rack rentals.
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Mick
> Vaites
> Sent: Friday, February 15, 2008 6:00 AM
> To: ccielab@groupstudy.com
> Subject: Frame-relay inverse-arp ...
>
> Hi All,
>
> I am guessing this must have been asked before ... but I cannot locate
> it ... apologies in advance for asking again.
>
> I have been struggling to get inverse arp on a specific DLCI to come up
> unless I specify it using "frame-relay interface-dlci [dlci] in the
> config .. eg:
>
> R1 (connected to Frame switch with DLCI 102 103 104 105)
>
> interface Serial0/0
> encapsulation frame-relay
> ip add 12.12.12.1 255.255.255.0
> no frame-relay inverse-arp ip 103
> no frame-relay inverse-arp ip 104
> no frame-relay inverse-arp ip 105
>
> R2 (connected to Frame switch with DLCI 201 203 204 205)
> interface Serial0/0
> encapsulation frame-relay
> ip addresss 12.12.12.2 255.255.255.0
> no frame-relay inverse-arp ip 203
> no frame-relay inverse-arp ip 204
> no frame-relay inverse-arp ip 205
>
> This senario produces no maps no matter how long I wait ...
>
> However adding :
>
> R1
> Serial0/0
> frame-relay interface-dlci 102
> R2
> Serial0/0
> frame-relay interface-dlci 201
>
> and it springs into life.
>
> I believe the additional config is unnecessary but for the life of me I
> am baffled as to why.I need it.
>
> Routers/IOS are 3640/12.4.8d and 2811/12.4.10c
>
> Thanks in advance
>
> Mick
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:49 ARST