From: Mick Vaites (mick@pobox.net.uk)
Date: Sun Feb 17 2008 - 10:41:07 ARST
Thanks Guys
I've just tried this ... and yup it just works ...
I knew that I was missing something silly just couldn't see it for
looking.
Thanks
Mick
-----Original Message-----
From: Shine Joseph [mailto:shinepjoseph@iprimus.com.au]
Sent: 17 February 2008 12:00
To: Mick Vaites; ccielab@groupstudy.com
Subject: RE: Frame-relay inverse-arp ...
Mick,
A reload of the router gets the mapping. Every time when I do a
inverse-arp, either the router comes ip with 0.0.0.0 mapping or no
mapping at all. Reload always fixed my issues.
HTH,
Shine
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Mick Vaites
Sent: Saturday, 16 February 2008 1:00 AM
To: ccielab@groupstudy.com
Subject: Frame-relay inverse-arp ...
Hi All,
I am guessing this must have been asked before ... but I cannot locate
it ... apologies in advance for asking again.
I have been struggling to get inverse arp on a specific DLCI to come up
unless I specify it using "frame-relay interface-dlci [dlci] in the
config .. eg:
R1 (connected to Frame switch with DLCI 102 103 104 105)
interface Serial0/0
encapsulation frame-relay
ip add 12.12.12.1 255.255.255.0
no frame-relay inverse-arp ip 103
no frame-relay inverse-arp ip 104
no frame-relay inverse-arp ip 105
R2 (connected to Frame switch with DLCI 201 203 204 205) interface
Serial0/0
encapsulation frame-relay
ip addresss 12.12.12.2 255.255.255.0
no frame-relay inverse-arp ip 203
no frame-relay inverse-arp ip 204
no frame-relay inverse-arp ip 205
This senario produces no maps no matter how long I wait ...
However adding :
R1
Serial0/0
frame-relay interface-dlci 102
R2
Serial0/0
frame-relay interface-dlci 201
and it springs into life.
I believe the additional config is unnecessary but for the life of me I
am baffled as to why.I need it.
Routers/IOS are 3640/12.4.8d and 2811/12.4.10c
Thanks in advance
Mick
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:48 ARST