From: Lora Ganeva (lganeva@mobiltel.bg)
Date: Wed Dec 19 2007 - 09:11:53 ART
Hi experts,
I am experiencing some problems with the following task:
Two routers , let's say R1 and R2 are connected (media is not important,
let's say it is Ethernet)
R1 Eth1/0---------------150.1.1.0/24------------- Eth1/0 R2
R1:
Eth1/0
Ip add 150.1.1.1 255.255.255.0
R2:
Eth1/0
Ip add 150.1.1.2 255.255.255.0
Routers are running rip and R2 is advertising the following networks to
R1
199.16.0.0/24
199.16.1.0/24
199.16.2.0/24
199.16.3.0/24
199.16.4.0/24
199.16.5.0/24
199.16.6.0/24
199.16.7.0/24
199.16.8.0/24
199.16.10.0/24
199.16.11.0/24
199.16.12.0/24
199.16.13.0/24
199.16.14.0/24
199.16.15.0/24
The task requires by configuring only R1 (not interface level command)
to allow with an ACL with only 2 lines the following subnets:
199.16.1.0/24 - 199.16.8.0/24
I have though a lot of any kind of ACLs but i still haven't come to a
good solution.
Any help will be appreciated,
Thanks,
Lora
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:31 ARST