From: Gupta, Gopal (NWCC) (gopal.gupta@hp.com)
Date: Fri Nov 23 2007 - 11:03:56 ART
Hi Folks,
I am facing issue with BGP..
R1 , R2, R3 are spokes connected to hub R5 throgh Frame relay .... all
with the major interface.
having subnet 155.1.0.0/24 and all are in their own individual AS ; R1
is in AS1, R2 in 2, R3 in 3, R5 in 5.
when routes originated by R2 are sent to R5 and then R5 in turn sends
that route to R3 or R1, the next hop doesn't change which should be
changed coz of EBGP connections and should not be changed coz of
Frame-relay NBMA on same subnet.
and if i try to set next-hop-self under neighbor stement on R5 for
R1,R2&R3..i get an error message
R5(config-router)#neighbor 155.1.0.1 next-hop-self
%BGP: next-hop-self is implied for an eBGP peer, there is no need to
configure it
R5(config-router)#neighbor 155.1.0.2 next-hop-self
%BGP: next-hop-self is implied for an eBGP peer, there is no need to
configure it
R5(config-router)#neighbor 155.1.0.3 next-hop-self
%BGP: next-hop-self is implied for an eBGP peer, there is no need to
configure it
I know i can set it manually throgh Route-map, is this the only way we
can have workaround or i am missing something.....not sure.
Any Comments please !!!!!!
Best Regards,
Gops
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:30 ART