From: Narbik Kocharians (narbikk@gmail.com)
Date: Fri Nov 23 2007 - 13:18:05 ART
Gupta,
This is a normal behavior
On 11/23/07, Vladimir Sousa <vladrac@gmail.com> wrote:
>
> Hello all,
>
> I dont think anyone answered the original question so far.
>
> "I know i can set it manually through Route-map, is this the only way we
> can have workaround or i am missing something.....not sure." He's asking
> if
> the behaviour he's seeing is normal, and if there's a way around it
> without
> setting a next hop IP on a router-map out
>
> Vlad
>
> On 11/23/07, Victor Cappuccio <vcappuccio@gmail.com> wrote:
> >
> > Hi Gupta,
> >
> > is 155.1.0.1 an external neighbor in your topology :)
> >
> > Example:
> > WG6R3(config-router)#do show ip bgp neigh 4.4.4.4 | in external
> > BGP neighbor is 4.4.4.4, remote AS 4, external link
> > WG6R3(config-router)#!So you can not configure Next-Hop-Self here
> > WG6R3(config-router)#neigh 4.4.4.4 next-hop-self
> > %BGP: next-hop-self is implied for an eBGP peer, there is no need to
> > configure it
> > WG6R3(config-router)#do show ip bgp neigh 2.2.2.2 | in internal
> >
> > EBGP next hops shall be announced using the IGP or you must
> Redistribute
> > connected interfaces into the IGP at the edge routers, or you must
> Include
> > links to EBGP neighbors into the IGP and configure them as passive
> > interfaces
> >
> > You can configure an edge router to set its IP address as the next-hop
> > address even when the BGP updates are sent across IBGP sessions. As a
> > result, there is no need for the receiver of the IBGP information to
> know
> > how to reach the far end of the EBGP session, because that IP address is
> > no
> > longer set as the next hop.
> > Both EBGP and IBGP sessions forward BGP updates but in slightly
> different
> > ways. BGP attributes are not changed when an update is sent across an
> IBGP
> > session unless next-hop-self is configured.
> >
> > HTH
> >
> > Victor Cappuccio
> > www.vcappuccio.wordpress.com
> >
> > On Nov 23, 2007 3:03 PM, Gupta, Gopal (NWCC) <gopal.gupta@hp.com> wrote:
> >
> > > Hi Folks,
> > >
> > > I am facing issue with BGP..
> > >
> > > R1 , R2, R3 are spokes connected to hub R5 throgh Frame relay .... all
> > > with the major interface.
> > > having subnet 155.1.0.0/24 and all are in their own individual AS ; R1
> > > is in AS1, R2 in 2, R3 in 3, R5 in 5.
> > >
> > > when routes originated by R2 are sent to R5 and then R5 in turn sends
> > > that route to R3 or R1, the next hop doesn't change which should be
> > > changed coz of EBGP connections and should not be changed coz of
> > > Frame-relay NBMA on same subnet.
> > >
> > > and if i try to set next-hop-self under neighbor stement on R5 for
> > > R1,R2&R3..i get an error message
> > >
> > > R5(config-router)#neighbor 155.1.0.1 next-hop-self
> > > %BGP: next-hop-self is implied for an eBGP peer, there is no need to
> > > configure it
> > > R5(config-router)#neighbor 155.1.0.2 next-hop-self
> > > %BGP: next-hop-self is implied for an eBGP peer, there is no need to
> > > configure it
> > > R5(config-router)#neighbor 155.1.0.3 next-hop-self
> > > %BGP: next-hop-self is implied for an eBGP peer, there is no need to
> > > configure it
> > >
> > > I know i can set it manually throgh Route-map, is this the only way we
> > > can have workaround or i am missing something.....not sure.
> > >
> > > Any Comments please !!!!!!
> > >
> > > Best Regards,
> > > Gops
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> >
> >
> >
> > --
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Narbik Kocharians CCIE# 12410 (R&S, SP, Security) CCSI# 30832 www.Net-WorkBooks.com
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:31 ART