From: shiran guez (shiranp3@gmail.com)
Date: Fri Nov 23 2007 - 10:43:27 ART
also if you do not want to look into the FRSW you can
see by
show fram pvc
if there is any other DLCI assigned if you do not see any PVC and you are
sure that the FRSW is configured correctly
1) check interface is Admin up
2) Add clock rate <speed> to the interface as probably the FRSW is not
giving it.
On Nov 23, 2007 3:40 PM, shiran guez <shiranp3@gmail.com> wrote:
> show us the FRSW config as according to the fram map you have no 102 or
> 201 DLCI mapped for this ports that Router 1 and 2 are connected. also check
> the clocking as it could be that the FRSW is not giving the clocking and all
> you need to do is add on your R1 and R2
>
> clock rate <xxxxx>
>
>
>
>
> On Nov 23, 2007 3:13 PM, Ron Lim <gottobeccie@gmail.com> wrote:
>
> > Hi all,
> >
> > I kept encountering frame relay status being deleted on serial
> > interface.
> >
> > R1 <-> FR SW <-> R2
> >
> > R1
> > ===
> > R1#sh frame map
> > Serial0/0/0 (up): ip 131.1.12.2 dlci 102(0x66,0x1860), static,
> > broadcast,
> > CISCO, status deleted
> > R1#sh run int s0/0/0
> > Building configuration...
> >
> > Current configuration : 166 bytes
> > !
> > interface Serial0/0/0
> > ip address 131.1.12.1 255.255.255.0
> > encapsulation frame-relay
> > frame-relay map ip 131.1.12.2 102 broadcast
> > no frame-relay inverse-arp
> > end
> >
> > R1#sh ver | inc Ver
> > Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9_SNA-M),
> > Version 12.4(10a), RELEASE SOFTWARE (fc2)
> > ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE
> > (fc1)
> > R1#
> >
> > FR SW
> > ======
> > FR_SW#sh ver | inc Ver
> > IOS (tm) C2600 Software (C2600-I-M), Version 12.2(28a), RELEASE SOFTWARE
> > (fc2)
> > ROM: System Bootstrap, Version 11.3(2)XA3, PLATFORM SPECIFIC RELEASE
> > SOFTWARE (fc1)
> > ROM: C2600 Software (C2600-I-M), Version 12.2(28a), RELEASE SOFTWARE
> > (fc2)
> > X.25 software, Version 3.0.0.
> > FR_SW#
> >
> > R2
> > ===
> > R2#sh frame map
> > Serial0/0/0 (up): ip 131.1.12.1 dlci 201(0xC9,0x3090), static,
> > broadcast,
> > CISCO, status deleted
> > R2#sh run int s0/0/0
> > Building configuration...
> >
> > Current configuration : 166 bytes
> > !
> > interface Serial0/0/0
> > ip address 131.1.12.2 255.255.255.0
> > encapsulation frame-relay
> > frame-relay map ip 131.1.12.1 201 broadcast
> > no frame-relay inverse-arp
> > end
> >
> > R2#sh ver | inc Ver
> > Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9_SNA-M),
> > Version 12.4(10a), RELEASE SOFTWARE (fc2)
> > ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
> > R2#
> >
> > How could I resolve this issue?
> >
> > Thank you.
> >
> > Regards,
> > Ron
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> --
> Shiran Guez
> MCSE CCNP NCE1
> http://cciep3.blogspot.com
> http://www.linkedin.com/in/cciep3
-- Shiran Guez MCSE CCNP NCE1 http://cciep3.blogspot.com http://www.linkedin.com/in/cciep3
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:30 ART