From: Ron Lim (gottobeccie@gmail.com)
Date: Fri Nov 23 2007 - 12:09:42 ART
Sorry, everyone, my mistake.
I got mixed up on the router, R1 -> R2, R2 -> R1.
Lesson learnt for me, wrong assignment of DLCI will result it being
auto deleted when interface is bought up.
Thanks all prompt response!
On Nov 23, 2007 9:39 PM, Carlos Trujillo Jimenez <nergal888@hotmail.com> wrote:
>
> Is the serial interface status and line protocol up up ?
> is the lmi in the frame relay switch sending the dlci you configure in your
> router?
> is the lmi up also?
>
>
> >From: "Ron Lim" <gottobeccie@gmail.com>
> >X-OriginalArrivalTime: 23 Nov 2007 13:33:42.0832 (UTC)
> >FILETIME=[77077300:01C82DD5]
> >
>
> >Hi all,
> >
> >I kept encountering frame relay status being deleted on serial interface.
> >
> >R1 <-> FR SW <-> R2
> >
> >R1
> >===
> >R1#sh frame map
> >Serial0/0/0 (up): ip 131.1.12.2 dlci 102(0x66,0x1860), static,
> > broadcast,
> > CISCO, status deleted
> >R1#sh run int s0/0/0
> >Building configuration...
> >
> >Current configuration : 166 bytes
> >!
> >interface Serial0/0/0
> > ip address 131.1.12.1 255.255.255.0
> > encapsulation frame-relay
> > frame-relay map ip 131.1.12.2 102 broadcast
> > no frame-relay inverse-arp
> >end
> >
> >R1#sh ver | inc Ver
> >Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9_SNA-M),
> >Version 12.4(10a), RELEASE SOFTWARE (fc2)
> >ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE
> >(fc1)
> >R1#
> >
> >FR SW
> >======
> >FR_SW#sh ver | inc Ver
> >IOS (tm) C2600 Software (C2600-I-M), Version 12.2(28a), RELEASE SOFTWARE
> >(fc2)
> >ROM: System Bootstrap, Version 11.3(2)XA3, PLATFORM SPECIFIC RELEASE
> >SOFTWARE (fc1)
> >ROM: C2600 Software (C2600-I-M), Version 12.2(28a), RELEASE SOFTWARE (fc2)
> >X.25 software, Version 3.0.0.
> >FR_SW#
> >
> >R2
> >===
> >R2#sh frame map
> >Serial0/0/0 (up): ip 131.1.12.1 dlci 201(0xC9,0x3090), static,
> > broadcast,
> > CISCO, status deleted
> >R2#sh run int s0/0/0
> >Building configuration...
> >
> >Current configuration : 166 bytes
> >!
> >interface Serial0/0/0
> > ip address 131.1.12.2 255.255.255.0
> > encapsulation frame-relay
> > frame-relay map ip 131.1.12.1 201 broadcast
> > no frame-relay inverse-arp
> >end
> >
> >R2#sh ver | inc Ver
> >Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9_SNA-M),
> >Version 12.4(10a), RELEASE SOFTWARE (fc2)
> >ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
> >R2#
> >
> >How could I resolve this issue?
> >
> >Thank you.
> >
> >Regards,
> >Ron
> >
> >_______________________________________________________________________
>
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
>
> _________________________________________________________________
> MSN Amor: busca tu = naranja http://latam.msn.com/amor/
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:31 ART