From: Cecil Wilson (Cecil.Wilson@flextronics.com)
Date: Sat Sep 29 2007 - 22:34:13 ART
Thanks, Joe
Cecil G. Wilson
IT Network Services
Office: (901) 215-2710
Cell: (901) 601-6201
cecil.wilson@flextronics.com
-----Original Message-----
From: Joseph Brunner [mailto:joe@affirmedsystems.com]
Sent: Saturday, September 29, 2007 7:39 PM
To: Cecil Wilson; 'shady darwish'; 'Cisco certification'
Subject: RE: BGP set community
You MUST match EXACTLY the route already in the routing table FIB to use
the "network" command.
If you want to change the mask
Ip route 44.44.44.44 255.255.255.0 null0 254 ("junk" it into the fib to
null0 and a high AD)
Router bgp 10
Redistribute static
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Cecil Wilson
Sent: Saturday, September 29, 2007 8:04 PM
To: shady darwish; Cisco certification
Subject: BGP set community
Hi GS
Can anyone explain why I have to use a 32 bit subnet in order to
advertise a network into BGP for example Int lo23 Ip add 44.44.44.44
255.255.255.255
Router bgp 10
Network 44.44.44.44 mask 255.255.255.255 Exit
This is the only way I can get a network to show up in sho ip bgp, if I
try address 44.44.44.44 255.255.255.0 it does not work. Is this
normal bgp behavior or am I missing something?
Thanks for your input
Cecil G. Wilson
IT Network Services
Office: (901) 215-2710
Cell: (901) 601-6201
cecil.wilson@flextronics.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
shady darwish
Sent: Saturday, September 29, 2007 5:35 PM
To: Cisco certification
Subject: need advice
is it enough to read tcp/ip 1 and 2 and BCMN selfstudy as core knowledge
for ccie lab and focus on QOS ,Security and multicast from videos COD
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:17 ART