From: Ryan (ryan95842@gmail.com)
Date: Sun Aug 26 2007 - 14:51:35 ART
Of course you will see the DLCI's, they are configured by the provider
and you have no control over that. Do the 'sh frame map' command...do
you see them mapped to an IP address? If you have configured properly,
you should not.
-Ryan
On 8/26/07, ccie1101 <ccie1101@gmail.com> wrote:
> I have a question that says the following :-
>
> ----------------------------------------------------------------------------------------
> Configure FR connection between R3 and R5.
> Do not use the frame relay map command on either R3 or R5.
> Do not allow Inverse-Arp request to be sent out any DLCIs other then 315 and
> 513 ...
> --------------------------------------------------------------------------------------------
>
> What I did was shut the interface, did a 'clear frame inarp' and then did a
>
> 'sh frame-relay pvc | inc DLCI' and look for all the DLCI's other then 315
> and 513 and typed the
> following command on the serial interface ...
>
> int s0/0
> no frame-relay inverse-arp ip 301
> no frame-relay inverse-arp ip 302
> no frame-relay inverse-arp ip 303
> no frame-relay inverse-arp ip 304
>
> and did a 'no shut' .... Is this correct, if not, what is the right steps
> to tackle this problem ? The reason being is that after I have put
> in the command, I still see all these DLCIs in and is in ACTIVE state.
>
> Rack1R3(config-if)#do sh frame pvc | inc DLCI
> DLCI = 301, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0/0
> DLCI = 302, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0.302
> DLCI = 304, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0/0
> DLCI = 305, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0/0
>
>
> Pls enlighten,
>
> Thank you,
> ccie1101.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:13 ART