From: Chris Riling (criling@gmail.com)
Date: Wed May 09 2007 - 01:40:44 ART
Sorry for the CCNA level question, but I'm tired and I'm sure it happens to
all of us at some point... Office number 1 has an 1811 with integrated 8
port switch; Office 2 has an 871. There is a dot1q trunk between fa3 on the
871, and fa2 on the 1811. Both have SVI's for VLAN1 with IP's assigned in
the same /24 (192.168.1.0/24). There is also a VLAN 100 existing on both
routers, with an SVI on each, which is part of the same /29. Both VLANs are
allowed from each side of the trunk, and when I just do the normal
"switchport trunk encap dot1q" and "switchport mode trunk" on each end, I
can't ping across the trunk to either SVI. If I set the native VLAN to 100
on each end, I can ping the SVI's and machines on VLAN 100, but I still
can't ping the SVI's on VLAN 1... any ideas?
Thanks,
Chris
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:20 ART