EIGRP Neighbor statement over Frame Relay

From: Kim (support@isolvesystems.com)
Date: Tue Mar 06 2007 - 11:37:04 ART

R2, R5, R6 are connected over Frame Relay Cloud. I have broadcast turned on,
but I can't get them peer with each other without EIGRP neighbor statement.
Any idea why?

R2
Serial0/0/0.256 (up): ip 150.50.100.5 dlci 205(0xCD,0x30D0), static,
              broadcast,
              CISCO, status defined, active
Serial0/0/0.256 (up): ip 150.50.100.6 dlci 206(0xCE,0x30E0), static,
              broadcast,
              CISCO, status defined, active

R5
Serial0/0/0 (up): ip 150.50.100.2 dlci 502(0x1F6,0x7C60), static,
              broadcast,
              CISCO, status defined, active
Serial0/0/0 (up): ip 150.50.100.6 dlci 502(0x1F6,0x7C60), static,
              broadcast,
              CISCO, status defined, active

R6
Serial0/0/0 (up): ip 150.50.100.2 dlci 602(0x25A,0x94A0), static,
              broadcast,
              CISCO, status defined, active
Serial0/0/0 (up): ip 150.50.100.5 dlci 602(0x25A,0x94A0), static,
              broadcast,
              CISCO, status defined, activ

This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART