From: Sean.Zimmerman@clubcorp.com
Date: Tue Mar 06 2007 - 12:13:41 ART
R2 isn't configured with an EIGRP network statement that covers
s0/0/0.256. Since R2's the hub, no peering will take place.
Kim <support@isolvesystems.com>
Sent by: nobody@groupstudy.com
03/06/2007 08:59 AM
Please respond to
Kim <support@isolvesystems.com>
To
groupstudy@cconlinelabs.com
cc
"Cisco certification" <ccielab@groupstudy.com>
Subject
Re: EIGRP Neighbor statement over Frame Relay
R2(config-router)#do sh run | be router
router eigrp 10
network 150.50.9.0 0.0.0.255
network 150.50.24.2 0.0.0.0
network 200.0.0.2 0.0.0.0
no auto-summary
R2#sho run int s0/0/0.256
Building configuration...
Current configuration : 207 bytes
!
interface Serial0/0/0.256 multipoint
ip address 150.50.100.2 255.255.255.192
frame-relay map ip 150.50.100.5 205 broadcast
frame-relay map ip 150.50.100.6 206 broadcast
no frame-relay inverse-arp
end
R5#sho run | be router
router eigrp 10
network 150.50.9.0 0.0.0.255
network 150.50.100.5 0.0.0.0
network 200.0.0.5 0.0.0.0
no auto-summary
neighbor 150.50.100.6 Serial0/0/0
interface Serial0/0/0
ip address 150.50.100.5 255.255.255.192
encapsulation frame-relay
no ip route-cache cef
no ip route-cache
ip ospf network point-to-multipoint
ip ospf priority 0
no fair-queue
frame-relay map ip 150.50.100.2 502 broadcast
frame-relay map ip 150.50.100.6 502 broadcast
no frame-relay inverse-arp
end
R6(config-router)#do sh run | be router
router eigrp 10
redistribute rip metric 1000 10 200 10 1500
redistribute ospf 1 metric 1000 10 200 10 1500
network 150.50.100.6 0.0.0.0
network 200.0.0.6 0.0.0.0
no auto-summary
neighbor 150.50.100.5 Serial0/0/0
!
interface Serial0/0/0
ip address 150.50.100.6 255.255.255.192
encapsulation frame-relay
ip ospf network point-to-multipoint
ip ospf priority 0
no fair-queue
frame-relay map ip 150.50.100.2 602 broadcast
frame-relay map ip 150.50.100.5 602 broadcast
no frame-relay inverse-arp
end
On 3/6/07, Tony Schaffran <groupstudy@cconlinelabs.com> wrote:
>
> It may help to see your EIGRP and interface configs.
>
>
> Tony Schaffran
> Network Analyst
> CCIE #11071
> CCNP, CCNA, CCDA,
> NNCDS, NNCSS, CNE, MCSE
>
> www.cconlinelabs.com
> Your #1 choice for online Cisco rack rentals.
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Kim
> Sent: Tuesday, March 06, 2007 6:37 AM
> To: Cisco certification
> Subject: EIGRP Neighbor statement over Frame Relay
>
> R2, R5, R6 are connected over Frame Relay Cloud. I have broadcast turned
> on,
> but I can't get them peer with each other without EIGRP neighbor
> statement.
> Any idea why?
>
> R2
> Serial0/0/0.256 (up): ip 150.50.100.5 dlci 205(0xCD,0x30D0), static,
> broadcast,
> CISCO, status defined, active
> Serial0/0/0.256 (up): ip 150.50.100.6 dlci 206(0xCE,0x30E0), static,
> broadcast,
> CISCO, status defined, active
>
> R5
> Serial0/0/0 (up): ip 150.50.100.2 dlci 502(0x1F6,0x7C60), static,
> broadcast,
> CISCO, status defined, active
> Serial0/0/0 (up): ip 150.50.100.6 dlci 502(0x1F6,0x7C60), static,
> broadcast,
> CISCO, status defined, active
>
> R6
> Serial0/0/0 (up): ip 150.50.100.2 dlci 602(0x25A,0x94A0), static,
> broadcast,
> CISCO, status defined, active
> Serial0/0/0 (up): ip 150.50.100.5 dlci 602(0x25A,0x94A0), static,
> broadcast,
> CISCO, status defined, activ
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART