From: Julio Carrasco Pinto \(Europe\) (Julio.Carrasco@eu.didata.com)
Date: Tue Mar 06 2007 - 13:31:33 ART
configuring network types as point to multipoint under all the interfaces. I think it should work, but you won4t have DR neither BDR
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de Kim
Enviado el: martes, 06 de marzo de 2007 16:29
Para: Jim
CC: groupstudy@cconlinelabs.com; Cisco certification
Asunto: Re: EIGRP Neighbor statement over Frame Relay
It works now by adding the network statement in R2. Is there any way I can have R5 and R6 peer directly with each other without R2 having the network statement?
Thanks.
Kim
On 3/6/07, Jim <firstnamejim@gmail.com> wrote:
>
> Did you try to add this in R2?
>
> router eigrp 10
> netowrk 150.50.100.0 0.0.0.255
>
> I think it was just R2 (hub) missing the eigrp network statement.
>
> On 3/6/07, Kim <support@isolvesystems.com> wrote:
> >
> > R2(config-router)#do sh run | be router router eigrp 10 network
> > 150.50.9.0 0.0.0.255 network 150.50.24.2 0.0.0.0 network 200.0.0.2
> > 0.0.0.0 no auto-summary R2#sho run int s0/0/0.256 Building
> > configuration...
> >
> > Current configuration : 207 bytes
> > !
> > interface Serial0/0/0.256 multipoint ip address 150.50.100.2
> > 255.255.255.192 frame-relay map ip 150.50.100.5 205 broadcast
> > frame-relay map ip 150.50.100.6 206 broadcast no frame-relay
> > inverse-arp end
> >
> >
> > R5#sho run | be router
> > router eigrp 10
> > network 150.50.9.0 0.0.0.255
> > network 150.50.100.5 0.0.0.0
> > network 200.0.0.5 0.0.0.0
> > no auto-summary
> > neighbor 150.50.100.6 Serial0/0/0
> > interface Serial0/0/0
> > ip address 150.50.100.5 255.255.255.192 encapsulation frame-relay no
> > ip route-cache cef no ip route-cache ip ospf network
> > point-to-multipoint ip ospf priority 0 no fair-queue frame-relay map
> > ip 150.50.100.2 502 broadcast frame-relay map ip 150.50.100.6 502
> > broadcast no frame-relay inverse-arp end
> >
> > R6(config-router)#do sh run | be router router eigrp 10 redistribute
> > rip metric 1000 10 200 10 1500 redistribute ospf 1 metric 1000 10
> > 200 10 1500 network 150.50.100.6 0.0.0.0 network 200.0.0.6 0.0.0.0
> > no auto-summary neighbor 150.50.100.5 Serial0/0/0 !
> > interface Serial0/0/0
> > ip address 150.50.100.6 255.255.255.192 encapsulation frame-relay ip
> > ospf network point-to-multipoint ip ospf priority 0 no fair-queue
> > frame-relay map ip 150.50.100.2 602 broadcast frame-relay map ip
> > 150.50.100.5 602 broadcast no frame-relay inverse-arp end
> >
> >
> > On 3/6/07, Tony Schaffran < groupstudy@cconlinelabs.com> wrote:
> > >
> > > It may help to see your EIGRP and interface configs.
> > >
> > >
> > > Tony Schaffran
> > > Network Analyst
> > > CCIE #11071
> > > CCNP, CCNA, CCDA,
> > > NNCDS, NNCSS, CNE, MCSE
> > >
> > > www.cconlinelabs.com
> > > Your #1 choice for online Cisco rack rentals.
> > >
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> > > Behalf
> > Of
> > > Kim
> > > Sent: Tuesday, March 06, 2007 6:37 AM
> > > To: Cisco certification
> > > Subject: EIGRP Neighbor statement over Frame Relay
> > >
> > > R2, R5, R6 are connected over Frame Relay Cloud. I have broadcast
> > turned
> > > on,
> > > but I can't get them peer with each other without EIGRP neighbor
> > > statement.
> > > Any idea why?
> > >
> > > R2
> > > Serial0/0/0.256 (up): ip 150.50.100.5 dlci 205(0xCD,0x30D0), static,
> > > broadcast,
> > > CISCO, status defined, active
> > > Serial0/0/0.256 (up): ip 150.50.100.6 dlci 206(0xCE,0x30E0), static,
> > > broadcast,
> > > CISCO, status defined, active
> > >
> > > R5
> > > Serial0/0/0 (up): ip 150.50.100.2 dlci 502(0x1F6,0x7C60), static,
> > > broadcast,
> > > CISCO, status defined, active Serial0/0/0 (up): ip
> > > 150.50.100.6 dlci 502(0x1F6,0x7C60), static,
> > > broadcast,
> > > CISCO, status defined, active
> > >
> > > R6
> > > Serial0/0/0 (up): ip 150.50.100.2 dlci 602(0x25A,0x94A0), static,
> > > broadcast,
> > > CISCO, status defined, active Serial0/0/0 (up): ip
> > > 150.50.100.5 dlci 602(0x25A,0x94A0), static,
> > > broadcast,
> > > CISCO, status defined, activ
> > >
> > >
> > ____________________________________________________________________
> > ___
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > ____________________________________________________________________
> > ___ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART