From: Tony Schaffran (groupstudy@cconlinelabs.com)
Date: Tue Mar 06 2007 - 11:51:54 ART
It may help to see your EIGRP and interface configs.
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Kim
Sent: Tuesday, March 06, 2007 6:37 AM
To: Cisco certification
Subject: EIGRP Neighbor statement over Frame Relay
R2, R5, R6 are connected over Frame Relay Cloud. I have broadcast turned on,
but I can't get them peer with each other without EIGRP neighbor statement.
Any idea why?
R2
Serial0/0/0.256 (up): ip 150.50.100.5 dlci 205(0xCD,0x30D0), static,
broadcast,
CISCO, status defined, active
Serial0/0/0.256 (up): ip 150.50.100.6 dlci 206(0xCE,0x30E0), static,
broadcast,
CISCO, status defined, active
R5
Serial0/0/0 (up): ip 150.50.100.2 dlci 502(0x1F6,0x7C60), static,
broadcast,
CISCO, status defined, active
Serial0/0/0 (up): ip 150.50.100.6 dlci 502(0x1F6,0x7C60), static,
broadcast,
CISCO, status defined, active
R6
Serial0/0/0 (up): ip 150.50.100.2 dlci 602(0x25A,0x94A0), static,
broadcast,
CISCO, status defined, active
Serial0/0/0 (up): ip 150.50.100.5 dlci 602(0x25A,0x94A0), static,
broadcast,
CISCO, status defined, activ
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART