From: Ben (ccieben@cox.net)
Date: Mon Feb 19 2007 - 21:34:58 ART
Hi C,
This thread cleared up much of the confusion for me:
http://www.groupstudy.com/archives/ccielab/200506/msg01535.html
HTH,
Ben
now_on_the_dark_side@hotmail.co.uk wrote:
> Hi GS
> Hope you can help me with this one, I have looked on CCO and can't find an explaination that offers a complete answer.
> I have a question on how to put the data from a PC into the correct vlan when connected via a IP phone.
> mls qos trust cos ....trust cos of tagged frames
> switchport mode dynamic desirable...dynamic 802.1Q trunk
> switchport voice vlan 90..CDP tells phone voice vlan
> auto qos voip cisco-phone...auto qos trust boundary phone or..
> mls qos trust device cisco-phone...manual QOS
>
> This much I understand
> ...........................................................
>
> So my question is for data (untagged before it reaches the phone)
> Do I use ..
> switchport access vlan 21
> or
> switchport trunk native vlan 21
>
> I have not managed to find an example on CCO where the data is anything but vlan 1
>
> Many Thanks in advance to anyone who can help
> C
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:47 ART