From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Thu Oct 19 2006 - 15:09:25 ART
The point-to-multipoint network type by design only advertises
the /32 endpoints of the network. If you want to advertise the /24
network itself you can either summarize the /32s with the area range
command as they go into another area or change the network type to
broadcast, non-broadcast, or point-to-point.
HTH,
Brian McGahan, CCIE #8593 (R&S/SP)
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Noor Yousuf
> Sent: Thursday, October 19, 2006 11:51 AM
> To: ccielab@groupstudy.com
> Subject: OSPF Multipoint issue
>
> Hi,
>
>
>
> I have a scenario like this
>
>
>
> R1 (multipoint) - R3 (PTPwithR3 and spokewithR5) - R5 (HUB)
>
> Lab says change the hello time on R3 to make it work with PTP.
>
> But when I see the route on R5, I actually see the interface IP of the
> R1 multipoint interface/32 as well as the network/24
>
> As soon as I change the network type to PTP on R3 the /32 route
> disappeared and I see only network/24 route.
>
>
>
> Any ideas
>
>
>
> Thanks
>
>
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:06 ART