OSPF Multipoint issue

From: Noor Yousuf (nyousuf@cciint.com)
Date: Thu Oct 19 2006 - 15:04:54 ART

• Next message: Edward Norton: "3550 lock and key"
• Previous message: Brian Dennis: "RE: OSPF Multipoint issue"
• Next in thread: Brian McGahan: "RE: OSPF Multipoint issue"
• Maybe reply: Brian McGahan: "RE: OSPF Multipoint issue"
• Maybe reply: Brian Dennis: "RE: OSPF Multipoint issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

I have a scenario like this

R1 (multipoint) - R3 (PTPwithR3 and spokewithR5) - R5 (HUB)

Lab says change the hello time on R3 to make it work with PTP.

But when I see the route on R5, I actually see the interface IP of the
R1 multipoint interface/32 as well as the network/24

As soon as I change the network type to PTP on R3 the /32 route
disappeared and I see only network/24 route.

Any ideas
Thanks

• Next message: Edward Norton: "3550 lock and key"
• Previous message: Brian Dennis: "RE: OSPF Multipoint issue"
• Next in thread: Brian McGahan: "RE: OSPF Multipoint issue"
• Maybe reply: Brian McGahan: "RE: OSPF Multipoint issue"
• Maybe reply: Brian Dennis: "RE: OSPF Multipoint issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:06 ART