From: Simon Tee (teetengloong@gmail.com)
Date: Sun Oct 15 2006 - 12:37:57 ART
Hi,
I do not have the error output from the switch, will try to obtain that and
post here, but if you lookup the command reference for 3560 there's only
"service-policy input".
Seems like only support it "one way"
regards,
Tee
On 10/15/06, Cagri Yucel <cyucel@gmail.com> wrote:
>
> What is the exact error you are getting ? This also might be due to some
> stuff you've put into policy-map.
>
> 3550 supports this happily, so if you can not even apply an empty
> policy-map a good step might be to check your IOS version ? Does it have IP
> support ? :)
>
>
> On 10/15/06, Simon Tee <teetengloong@gmail.com> wrote:
>
> > Hi guys,
> >
> > Wanted to enforce outgoing traffic bandwidth on a 3560 interface but
> > just
> > realized that 3560 do not allow for the command "service-policy output"
> > and
> > there's no rate-limit command available on the switch.
> >
> > Any idea how I can achieve this?
> >
> > Thanks and best regards,
> > Tee
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> --
> -cagri
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:05 ART