From: Fabio Rodrigues (fleandror2@gmail.com)
Date: Fri Sep 15 2006 - 15:38:10 ART
Brian,
Done ! Tks a lot. But, here I have 2 switches (3560 and 3550). The switch
that I used to this lab was the 3560 (where i didn't find the "IGMP
Snooping" message). I tested in the 3550 and saw the message.
Tks again.
Fabio.
----- Original Message -----
From: "Brian Dennis" <bdennis@internetworkexpert.com>
To: "Fabio Rodrigues" <fleandror2@gmail.com>; <ccielab@groupstudy.com>
Sent: Friday, September 15, 2006 3:19 PM
Subject: RE: IEWB - V1 Lab 14 Task 4.5
See below:
Rack1SW1(config)#
Rack1SW1(config)#mac-address-table static 0100.5e00.000a vlan 1363
interface FastEthernet0/1
IGMP Snooping or MVR enabled on vlan 1363. Can't add static multicast
addresses.
Rack1SW1(config)#no ip igmp snooping vlan 1363
Rack1SW1(config)#mac-address-table static 0100.5e00.000a vlan 1363
interface FastEthernet0/1
Rack1SW1(config)#
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Fabio Rodrigues
Sent: Friday, September 15, 2006 10:01 AM
To: ccielab@groupstudy.com
Subject: IEWB - V1 Lab 14 Task 4.5
Hi All,
Does anyone knows why in the Solution Guide they used the "no ip igmp
snooping 1363" command ?
Tks,
Fabio.
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART