From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri Sep 15 2006 - 15:19:55 ART
See below:
Rack1SW1(config)#
Rack1SW1(config)#mac-address-table static 0100.5e00.000a vlan 1363
interface FastEthernet0/1
IGMP Snooping or MVR enabled on vlan 1363. Can't add static multicast
addresses.
Rack1SW1(config)#no ip igmp snooping vlan 1363
Rack1SW1(config)#mac-address-table static 0100.5e00.000a vlan 1363
interface FastEthernet0/1
Rack1SW1(config)#
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Fabio Rodrigues
Sent: Friday, September 15, 2006 10:01 AM
To: ccielab@groupstudy.com
Subject: IEWB - V1 Lab 14 Task 4.5
Hi All,
Does anyone knows why in the Solution Guide they used the "no ip igmp
snooping 1363" command ?
Tks,
Fabio.
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART