From: george stanza (cert2006@gmail.com)
Date: Sun May 21 2006 - 22:09:25 ART
i have sw1 & sw2 both in transparent mode..but interfaces fa0/10 on both the
switches are connected thru ether-channel running PagP..and encap dot1q..
Vlan 10 is configured on sw1 and 'switchport trunk allowed vlan 10' is
configured on both the switchs 'ether-channel' mode..
Wouldnt vlan 10 be shown on sw2 also ?..i dont see this happening..Both
switches are running VTP version 2..
sw1:
====
interface FastEthernet0/10
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10
switchport mode trunk
channel-group 1 mode desirable
!
interface Port-channel1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10
switchport mode trunk
!
sw2:
===
interface FastEthernet0/10
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10
switchport mode trunk
channel-group 1 mode desirable
!
interface Port-channel1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10
switchport mode trunk
!
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART