From: KC (kanwal.chawla@gmail.com)
Date: Fri May 05 2006 - 03:35:55 ART
Map to LInk Local addresses too. U can find it byt (( sh ipv6 int e0))
frame-relay map ipv6 (LINKOCAL) (Local DLCI)
On 5/4/06, george stanza <cert2006@gmail.com> wrote:
>
> R1 & R2 are connected over a frame-relay and i am trying to deploy ipv6
> over
> the FR circuit and configure OSPF between them..i dont see ipv6 OSPF
> sessions coming up though..I believe i need to configure ipv6 link-local
> address but the question says that the ipv6 address should be something
> like
> 2100:0108:122:15::1/64 & 2100:0108:122:15::2/64
>
> R1 Config:
> ========
> ipv6 unicast-routing
> int s1
> ipv6 address 2100:0108:122:15::1/64
> ipv6 enable
> ipv6 ospf 4 area 0
> frame-relay map ipv6 2100:0108:122:15::2 112 broadcast
>
> R2 Config:
> ========
> ipv6 unicast-routing
> int s1
> ipv6 enable
> ipv6 address 2100:0108:122:15::2/64
> ipv6 ospf network point-to-point
> ipv6 ospf 2 area 0
> frame-relay map ipv6 2100:0108:122:15::1 121 broadcast
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:20 ART