From: george stanza (cert2006@gmail.com)
Date: Fri May 05 2006 - 03:26:33 ART
R1 & R2 are connected over a frame-relay and i am trying to deploy ipv6 over
the FR circuit and configure OSPF between them..i dont see ipv6 OSPF
sessions coming up though..I believe i need to configure ipv6 link-local
address but the question says that the ipv6 address should be something like
2100:0108:122:15::1/64 & 2100:0108:122:15::2/64
R1 Config:
========
ipv6 unicast-routing
int s1
ipv6 address 2100:0108:122:15::1/64
ipv6 enable
ipv6 ospf 4 area 0
frame-relay map ipv6 2100:0108:122:15::2 112 broadcast
R2 Config:
========
ipv6 unicast-routing
int s1
ipv6 enable
ipv6 address 2100:0108:122:15::2/64
ipv6 ospf network point-to-point
ipv6 ospf 2 area 0
frame-relay map ipv6 2100:0108:122:15::1 121 broadcast
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:20 ART