From: graham strydom (gstrydom74@ananzi.co.za)
Date: Tue May 02 2006 - 04:08:35 ART
Seem to have made a typo in my post ...
Should read as follows;
> > R3(F0/0-160.10.22.3/24) <-->
> > (F0/0-160.10.22.6/24)R6(S0/1-170:100:10::1/64) <-->
> > (S0/1-170:100:10::254/64) R11
I already have a route on R11 as follows;
ipv6 route 2010:1111::/96 170:100:10::1
On Tue, 2 May 2006 00:00:43 -0700
san <san.study@gmail.com> wrote:
> Graham,
>
> Couple of suggestions:
> 1) R11, S0/1 address change it to 170:100:10::254
> 2) At R11, have a IPV6 static route for pool address
> 2010 with next hop to
> R6. (So that return traffic can go through from R11)
>
>
>
>
> On 5/1/06, graham strydom <gstrydom74@ananzi.co.za>
> wrote:
> >
> > Hi All,
> > I am struggling with IPV6 nat..just cannot seem to get
> it
> > working...
> > Setup as follows
> > R3(F0/0-160.10.22.3/24) <-->
> > (F0/0-160.10.22.6/24)R6(S0/1-170:100:10::1/64) <-->
> > (S0/1-160:100:10::254/64) R11
> >
> > Config of Nat router as follows;
> > Host R6
> > !
> > interface FastEthernet0/0
> > ip address 160.10.22.6 255.255.255.0
> > ipv6 nat
> > !
> > interface Serial0/1
> > no ip address
> > ipv6 address 170:100:10::1/64
> > ipv6 nat prefix 2010:1111::/96
> > ipv6 nat
> > no dce-terminal-timing-enable
> > !
> > ipv6 nat v4v6 source 160.10.22.3 2010:1111::1
> > ipv6 nat v6v4 source 170:100:10::254 160.10.22.8
> >
> > I added a IPV6 static route to R11 for 2010:1111::/96.
> >
> > Thanks
> > Graham
> >
> > We are giving away Mugg & Bean Infinity cards to the
> value of R50 each to
> > the first 30 Ananzi Dial-up sign-ups! Click here!:
> >
> >
>
http://www.swiftsms.co.za/swiftT/track.asp?e=*em*&cid=113&u=8&tid=1062
> >
> >
>
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:20 ART