From: graham strydom (gstrydom74@ananzi.co.za)
Date: Tue May 02 2006 - 03:27:47 ART
Hi All,
I am struggling with IPV6 nat..just cannot seem to get it
working...
Setup as follows
R3(F0/0-160.10.22.3/24) <-->
(F0/0-160.10.22.6/24)R6(S0/1-170:100:10::1/64) <-->
(S0/1-160:100:10::254/64) R11
Config of Nat router as follows;
Host R6
!
interface FastEthernet0/0
ip address 160.10.22.6 255.255.255.0
ipv6 nat
!
interface Serial0/1
no ip address
ipv6 address 170:100:10::1/64
ipv6 nat prefix 2010:1111::/96
ipv6 nat
no dce-terminal-timing-enable
!
ipv6 nat v4v6 source 160.10.22.3 2010:1111::1
ipv6 nat v6v4 source 170:100:10::254 160.10.22.8
I added a IPV6 static route to R11 for 2010:1111::/96.
Thanks
Graham
We are giving away Mugg & Bean Infinity cards to the value of R50 each to the first 30 Ananzi Dial-up sign-ups! Click here!:
http://www.swiftsms.co.za/swiftT/track.asp?e=*em*&cid=113&u=8&tid=1062
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:20 ART