Re: IPV6 Nat??

From: graham strydom (gstrydom74@ananzi.co.za)
Date: Tue May 02 2006 - 10:14:08 ART

• Next message: john matijevic: "Re: interesting article of certifications"
• Previous message: Leigh Harrison: "URL Wrap and TinyURL"
• Maybe in reply to: graham strydom: "IPV6 Nat??"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Unfortunately my rack time is up but will try again
tomorrow.
With the bdebug ipv6 nat detailedb? I also picked up
errors about unable to find a v4v6 entry, this is while
pinging from the ipv6 side of the network.
Should icmp work?

Graham

On Tue, 2 May 2006 15:54:56 +0400
 "Petr Lapukhov" <petrsoft@gmail.com> wrote:
> Hm..
> Please check
>
> sh ip arp 160.10.22.8
>
> at R6. Maybe it does not automatically create alias.
>
> HTH
> Petr
>
> 2006/5/2, graham strydom <gstrydom74@ananzi.co.za>:
> >
> > During Debugging I see that the tranlation is only from
> > ipv6 to ipv4...what am I missing?
> >
> > Thanks
> > Graham
> >
> >
> > On Tue, 02 May 2006 09:08:35 +0200
> > "graham strydom" <gstrydom74@ananzi.co.za> wrote:
> > > Seem to have made a typo in my post ...
> > > Should read as follows;
> > >
> > > > > R3(F0/0-160.10.22.3/24) <-->
> > > > > (F0/0-160.10.22.6/24)R6(S0/1-170:100:10::1/64)
> <-->
> > > > > (S0/1-170:100:10::254/64) R11
> > >
> > > I already have a route on R11 as follows;
> > > ipv6 route 2010:1111::/96 170:100:10::1
> > >
> > >
> > >
> > > On Tue, 2 May 2006 00:00:43 -0700
> > > san <san.study@gmail.com> wrote:
> > > > Graham,
> > > >
> > > > Couple of suggestions:
> > > > 1) R11, S0/1 address change it to 170:100:10::254
> > > > 2) At R11, have a IPV6 static route for pool
> address
> > > > 2010 with next hop to
> > > > R6. (So that return traffic can go through from
> R11)
> > > >
> > > >
> > > >
> > > >
> > > > On 5/1/06, graham strydom <gstrydom74@ananzi.co.za>
> > > > wrote:
> > > > >
> > > > > Hi All,
> > > > > I am struggling with IPV6 nat..just cannot seem
> to
> > > get
> > > > it
> > > > > working...
> > > > > Setup as follows
> > > > > R3(F0/0-160.10.22.3/24) <-->
> > > > > (F0/0-160.10.22.6/24)R6(S0/1-170:100:10::1/64)
> <-->
> > > > > (S0/1-160:100:10::254/64) R11
> > > > >
> > > > > Config of Nat router as follows;
> > > > > Host R6
> > > > > !
> > > > > interface FastEthernet0/0
> > > > > ip address 160.10.22.6 255.255.255.0
> > > > > ipv6 nat
> > > > > !
> > > > > interface Serial0/1
> > > > > no ip address
> > > > > ipv6 address 170:100:10::1/64
> > > > > ipv6 nat prefix 2010:1111::/96
> > > > > ipv6 nat
> > > > > no dce-terminal-timing-enable
> > > > > !
> > > > > ipv6 nat v4v6 source 160.10.22.3 2010:1111::1
> > > > > ipv6 nat v6v4 source 170:100:10::254 160.10.22.8
> > > > >
> > > > > I added a IPV6 static route to R11 for
> > > 2010:1111::/96.
> > > > >
> > > > > Thanks
> > > > > Graham
> > > > >
> > > > > We are giving away Mugg & Bean Infinity cards to
> the
> > > > value of R50 each to
> > > > > the first 30 Ananzi Dial-up sign-ups! Click
> here!:
> > > > >
> > > > >
> > > >
> > >
> >
>
http://www.swiftsms.co.za/swiftT/track.asp?e=*em*&cid=113&u=8&tid=1062
> > > > >
> > > > >
> > > >
> > >
> >
>

• Next message: john matijevic: "Re: interesting article of certifications"
• Previous message: Leigh Harrison: "URL Wrap and TinyURL"
• Maybe in reply to: graham strydom: "IPV6 Nat??"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:20 ART