From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Wed Mar 15 2006 - 17:51:16 GMT-3
Group - I have a frame relay question..... on the following show frame
map, it shows BW=256000. The documentation is a bit silent on this
issue, but is this determined by the cir of the line, or, the clock
speed that the interface is receiving. There is no bandwidth statement
configured. TIA.
MINN#sh frame map
Serial0.302 (administratively down): point-to-point dlci, dlci
300(0x12C,0x48C0)
, broadcast
status deleted,
RTP Header Compression (inherited), connections: 256
Serial0.330 (up): point-to-point dlci, dlci 330(0x14A,0x50A0),
broadcast, BW = 256000
status defined, active,
RTP Header Compression (inherited), connections: 256
Dave
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3