From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Wed Mar 15 2006 - 18:23:22 GMT-3
Thanks, Rafay. Is there anywhere that this can be noted in the
docCD....I couldn't locate it?
Dave Schulz,
Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com%20>
________________________________
From: Rafay Aslam [mailto:smrafay@gmail.com]
Sent: Wednesday, March 15, 2006 4:04 PM
To: Schulz, Dave
Cc: ccielab@groupstudy.com
Subject: Re: Frame-relay BW statement question
it is the clock rate ....
On 3/15/06, Schulz, Dave <DSchulz@dpsciences.com> wrote:
Group - I have a frame relay question..... on the following show frame
map, it shows BW=256000. The documentation is a bit silent on this
issue, but is this determined by the cir of the line, or, the clock
speed that the interface is receiving. There is no bandwidth statement
configured. TIA.
MINN#sh frame map
Serial0.302 (administratively down): point-to-point dlci, dlci
300(0x12C,0x48C0)
, broadcast
status deleted,
RTP Header Compression (inherited), connections: 256
Serial0.330 (up): point-to-point dlci, dlci 330(0x14A,0x50A0),
broadcast, BW = 256000
status defined, active,
RTP Header Compression (inherited), connections: 256
Dave
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3