From: sameer.azam@gmail.com
Date: Wed Mar 01 2006 - 02:09:40 GMT-3
Hi,
I have a router with 2 FastEthernet Interfaces
F0/0 & F0/1.
F0/0 is directly connected with some other router.
&
F0/1 is subdidided in to 2 more Sub interface
F0/1.1---- connected with R5.
F0/1.2---- Connected with R6
Now i need to make a class-map so that all the traffic that comes on the
F0/1.1 or all the traffic comming from R5 should be limited to 2Mb.
and the policy-map i can only apply to the F0/0 ( as this is the part of the Question which i can't change).
Now there is a option with the class-map that is
match input-interface
so if i use this option i can simply select the input interface as F0/1.1
BUT
the problem is when i see the running config i see
CLASS-MAP match-all From_R5
match input-interface FastEthernet0/1------> instead if FastEthernet0/1.1
So any idea about this problem or is there any other way to solve this proble,.
Regards
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:37 GMT-3