From: Chris Lewis (chrlewiscsco@gmail.com)
Date: Thu Mar 02 2006 - 19:04:53 GMT-3
Please see my previous reply to Sameer. To allocate bandwidth on a
sub-interface requires a shaping policy be applied to the sub-interface with
a nested child policy under the shaping policy to assign the bandwidth.
Chris
On 3/1/06, KC <kanwal.chawla@gmail.com> wrote:
>
> Hi Sameer
>
> I read your question and i am sure that if you are using CBWFQ with the
> Bandwidth command in Class-map , it will not show you on subinterface,
> because the reason is CBWFQ is not supported on Sub Interfaces.
>
> Tell me buddies , if i am wrong ??
>
>
> On 2/28/06, sameer.azam@gmail.com <sameer.azam@gmail.com> wrote:
> >
> > Hi,
> > I have a router with 2 FastEthernet Interfaces
> > F0/0 & F0/1.
> >
> > F0/0 is directly connected with some other router.
> > &
> > F0/1 is subdidided in to 2 more Sub interface
> >
> > F0/1.1---- connected with R5.
> > F0/1.2---- Connected with R6
> >
> > Now i need to make a class-map so that all the traffic that comes on the
> > F0/1.1 or all the traffic comming from R5 should be limited to 2Mb.
> >
> > and the policy-map i can only apply to the F0/0 ( as this is the part of
> > the Question which i can't change).
> >
> > Now there is a option with the class-map that is
> >
> > match input-interface
> > so if i use this option i can simply select the input interface as
> F0/1.1
> > BUT
> > the problem is when i see the running config i see
> > CLASS-MAP match-all From_R5
> > match input-interface FastEthernet0/1------> instead if
> FastEthernet0/1.1
> >
> >
> > So any idea about this problem or is there any other way to solve this
> > proble,.
> >
> > Regards
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:37 GMT-3