From: Chris Lewis (chrlewiscsco@gmail.com)
Date: Sat Mar 04 2006 - 01:12:54 GMT-3
OK,
Configure this and experiment with it, it is not the only way to do it.
class-map match-all decnet
match protocol decnet
class-map match-all bridge
!
policy-map child
class bridge
bandwidth percent 20
class decnet
bandwidth percent 30
policy-map parent
class class-default
shape average percent 100
service-policy child
!
interface Serial2/0
ip address 10.1.1.1 255.255.255.0
encapsulation frame-relay
serial restart-delay 0
frame-relay map ip 10.1.1.3 133
frame-relay map ip 10.1.1.12 122
!
interface Serial2/0.1 point-to-point
ip address 12.12.12.1 255.255.255.0
frame-relay interface-dlci 144
service-policy output parent
!
Router1(config-subif)#do sho policy-map int
Serial2/0.1
Service-policy output: parent
Class-map: class-default (match-any)
4 packets, 1380 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Traffic Shaping
Target/Average Byte Sustain Excess Interval Increment
Rate Limit bits/int bits/int (ms) (bytes)
100 (%) 0 (ms) 0 (ms)
1544000/1544000 9650 38600 38600 25 4825
Adapt Queue Packets Bytes Packets Bytes Shaping
Active Depth Delayed Delayed Active
- 0 4 1380 0 0 no
Service-policy : child
Class-map: bridge (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: protocol bridge
Queueing
Output Queue: Conversation 73
Bandwidth 20 (%)
Bandwidth 308 (kbps) Max Threshold 64 (packets)
(pkts matched/bytes matched) 0/0
(depth/total drops/no-buffer drops) 0/0/0
Class-map: decnet (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: protocol decnet
Queueing
Output Queue: Conversation 74
Bandwidth 30 (%)
Bandwidth 463 (kbps) Max Threshold 64 (packets)
(pkts matched/bytes matched) 0/0
(depth/total drops/no-buffer drops) 0/0/0
Class-map: class-default (match-any)
4 packets, 1380 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Router1(config-subif)#
This shows shaping to 100% of interface bandwidth, and allocating bandwidth
to classes on a sub-interface.
Chris
On 3/2/06, KC <kanwal.chawla@gmail.com> wrote:
>
> Chris,
>
> Can u tell the commands and syntax on this please. because i want to clear
> my confusion
>
> Regards
> KC
>
>
> On 3/2/06, Chris Lewis <chrlewiscsco@gmail.com> wrote:
> >
> > Please see my previous reply to Sameer. To allocate bandwidth on a
> > sub-interface requires a shaping policy be applied to the sub-interface
with
> > a nested child policy under the shaping policy to assign the bandwidth.
> >
> > Chris
> >
> >
> > On 3/1/06, KC <kanwal.chawla@gmail.com > wrote:
> > >
> > > Hi Sameer
> > >
> > > I read your question and i am sure that if you are using CBWFQ with
> > > the
> > > Bandwidth command in Class-map , it will not show you on subinterface,
> > >
> > > because the reason is CBWFQ is not supported on Sub Interfaces.
> > >
> > > Tell me buddies , if i am wrong ??
> > >
> > >
> > > On 2/28/06, sameer.azam@gmail.com < sameer.azam@gmail.com> wrote:
> > > >
> > > > Hi,
> > > > I have a router with 2 FastEthernet Interfaces
> > > > F0/0 & F0/1.
> > > >
> > > > F0/0 is directly connected with some other router.
> > > > &
> > > > F0/1 is subdidided in to 2 more Sub interface
> > > >
> > > > F0/1.1---- connected with R5.
> > > > F0/1.2---- Connected with R6
> > > >
> > > > Now i need to make a class-map so that all the traffic that comes on
> > > the
> > > > F0/1.1 or all the traffic comming from R5 should be limited to 2Mb.
> > > >
> > > > and the policy-map i can only apply to the F0/0 ( as this is the
> > > part of
> > > > the Question which i can't change).
> > > >
> > > > Now there is a option with the class-map that is
> > > >
> > > > match input-interface
> > > > so if i use this option i can simply select the input interface as
> > > F0/1.1
> > > > BUT
> > > > the problem is when i see the running config i see
> > > > CLASS-MAP match-all From_R5
> > > > match input-interface FastEthernet0/1------> instead if
> > > FastEthernet0/1.1
> > > >
> > > >
> > > > So any idea about this problem or is there any other way to solve
> > > this
> > > > proble,.
> > > >
> > > > Regards
> > > >
> > > >
> > > _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3